- INDOOR LIGHTS
- 360 Degree Neon Customised Lighting
- Magnetic Track Lights
- Skyline Steel Strip Lighting
- Chandelier & Pendant
- Down Lights
- Bulbs
- Surface Mounted Lights
- Led Rope Light
- Led panels
- Cabinet & Wardrobe Lights
- Led Tube and Batten Lights
- Linear Hanging & Recessed Bar Lights
- Track Lights
- Wall Lights
- Fibre Optic Ceiling Lights
- Lamps
- OUTDOOR LIGHTS
- SOLAR LIGHTS
- Disco and Party Lighs
- Led Addressable Lights & Controllers
- Fibre Optic Lights
- Stretch Fabric Ceiling Light
- Silicone Profile Light
- Led Strip Lights
- Led Aluminium Profile
- Led Adapters & Power Supplies
- Customized Lights
- Led tree Lighting and Decoration
- OTHER PRODUCTS
LG 18650 Cell – 3500mAh 3.7V | High-Capacity Li-ion
₨ 1,100
Genuine LG INR18650-MJ1 high-capacity 18650 Li-ion cell (LG Energy Solution). 3500mAh typical / 3400mAh min, 3.7V nominal, ~12.72Wh, ~260Wh/kg, 10A max continuous discharge. The energy-density champion for power banks, e-bike packs, portable electronics and UPS — the direct peer of the Samsung 35E.
Matched-batch bulk pricing available.
Category: Solar and Energy Storage
Tags: 12.72Wh 18650, 18650 battery Pakistan, 3500mAh 18650 cell, 48V e-bike battery cell, battery pack cells Pakistan, e-bike 18650 pack, high capacity 18650 battery, LG Energy Solution 18650, LG INR18650-MJ1, Li-ion NMC cell, MJ1 vs Samsung 35E, power bank cell, unprotected 18650 cell, UPS battery cell
Description
LG INR18650-MJ1 — The High-Capacity 18650 for Packs Where Weight Wins
The LG INR18650-MJ1 is LG Energy Solution’s answer to the Samsung 35E: a 3500 mAh high-capacity INR (Nickel-Manganese) 18650 that maximises stored energy per gram rather than raw current. At ~12.72 Wh and ~260 Wh/kg, it is the cell you specify when pack mass and volume are the binding constraints — power banks, e-bike and scooter battery packs, portable medical and electronics, and UPS modules — and where continuous draw stays within its 10 A (≈3 C) ceiling. For Pakistani pack builders who need the most watt-hours out of the smallest, lightest cylinder, the MJ1 is the default high-capacity choice.
At Newon we supply only matched, batch-traceable Grade-A cells — verified for capacity, voltage and internal resistance before shipment — exactly as we do across our custom battery projects. The MJ1 is an unprotected flat-top: it must live inside a pack with a proper BMS. See our Custom Battery Solutions for finished, protected builds.
Full Specification (LG INR18650-MJ1)
| Model | LG INR18650-MJ1 |
| Manufacturer | LG Chem / LG Energy Solution |
| Chemistry | Li-ion INR (Nickel Manganese) |
| Nominal Voltage | 3.7 V (often rounded 3.6 / 3.7 V) |
| Typical / Min Capacity | 3500 mAh typical · 3400 mAh minimum |
| Nominal Energy | ~12.72 Wh (3.635 V × 3.5 Ah) |
| Charge / Discharge Cut-off | 4.2 V charge · 2.5 V discharge |
| Std / Max Charge Current | 1.7 A (0.5 C) standard · 3.4 A (1 C) max |
| Max Continuous Discharge | 10 A (≈3 C) · ~12.2 A pulse peak |
| Initial AC Internal Resistance | ≤ 40 mΩ (1 kHz) |
| Dimensions / Weight | Ø18.4 × 65 mm · ~49 g |
| Energy Density | ~260 Wh/kg |
| Cycle Life | ≥ 80% capacity after 401 cycles |
| Operating Temp | Charge 0–45 °C · Discharge −20–60 °C |
C-Rate Analysis — Read This Before You Size a Pack
On a 3.5 Ah cell the MJ1 is a moderate-drain, high-capacity design, not a power cell:
- Max continuous discharge ≈ 3 C — sustains up to 10 A per cell.
- Max charge ≈ 0.97 C (3.4 A) ; standard charge 0.5 C (1.7 A) is the longevity-optimal rate.
- Thermal reality at the limit: 10 A through ≤40 mΩ dissipates I²R = 10² × 0.040 = ~4 W per cell. At full continuous load the pack needs airflow or a thermal path — do not bury MJ1 cells running near 10 A in a sealed enclosure.
LG MJ1 vs Samsung 35E (and the Newon Lineup)
| Cell | Capacity | Nominal V | Max Cont. Discharge | Best For |
| LG INR18650-MJ1 (this) | 3500 mAh | 3.7 V | 10 A (~3 C) | Max Wh/kg packs, moderate drain |
| Samsung INR18650-35E | 3500 mAh | 3.7 V | ~10–10.8 A (~3 C) | Near-identical peer; interchangeable |
| INR18650-26EC | 2600 mAh | 3.7 V | 7.8 A (3 C) | Balanced energy + 3C + 800+ cyc |
| EVE MB31 (LFP) | 314 Ah | 3.2 V | 0.5 P (≈157 A) | Daily-cycling solar/ESS, 8000 cyc |
Unsure Li-ion vs LFP for your duty cycle? Read the LiFePO4 vs Li-ion Guide.
Pack Building Formulas & Configurations
Nominal pack V = 3.635 V × S Full-charge pack V = 4.2 V × S Cutoff pack V = 2.5 V × S Pack capacity Ah = 3.5 Ah × P Pack energy Wh = (3.635 × S) × (3.5 × P) Max cont. pack A = 10 A × P (≈2.86 C per cell) 4S1P = 14.54 V nom / 16.8 V charge / 10.0 V cutoff · 3.5 Ah · 50.9 Wh · 10 A → power banks, small UPS 7S1P = 25.45 V nom / 29.4 V charge / 17.5 V cutoff · 3.5 Ah · 89.1 Wh · 10 A → 24 V-class control packs 13S1P = 47.3 V nom / 54.6 V charge / 32.5 V cutoff · 3.5 Ah · 165.6 Wh · 10 A → 48 V e-bike (1P) 4S10P = 14.54 V nom · 35 Ah · 509 Wh · 100 A cont. → high-energy portable station 13S10P= 47.3 V nom · 35 Ah · 1,656 Wh · 100 A cont. → 48 V e-bike / light EV
Design rule: size routine loads at ≤0.5 C (1.7 A/cell) for maximum cycle life; treat 10 A as the absolute continuous ceiling and provide thermal headroom (see the 4 W/cell note above).
⚠️ Safety & Handling — Non-Negotiable
- UNPROTECTED flat-top cell. No internal protection circuit. An external BMS is mandatory in any pack — overcharge, over-discharge, overcurrent, short-circuit and temperature protection. Pair with a compatible 18650 BMS (e.g. the JK Smart BMS family for LFP; use an Li-ion 4S–13S BMS for MJ1 packs).
- Never solder directly to the cell. Use spot-welded nickel tabs/strips; direct solder destroys the vent and seal.
- Charge only 0–45 °C ; discharge −20–60 °C. Never charge below 0 °C (lithium plating). In Karachi, Gujrat and Multan summers, plant-room ambient can exceed 45 °C — provide shaded, ventilated or actively cooled charging space or the BMS must throttle charge.
- Low-temperature behaviour: available capacity and current derate below ~0 °C per normal Li-ion physics ; confirm exact derate against the datasheet — not quantified here.
- Storage: hold at 30–50% SOC, cool & dry; refresh with a charge–discharge cycle every ~3 months; never store below 2.5 V/cell.
- Polarity & shorts: observe +/− labels; reverse charge forbidden; never bridge terminals with metal, jewellery or tools.
Ideal Applications in Pakistan
- Power banks & portable stations: 3S–4S high-energy packs where grams matter.
- E-bikes / e-scooters / rickshaw control & light propulsion packs: 13S (48 V) and 7S (24 V) architectures.
- UPS & telecom backup modules: moderate-drain, high-density banks.
- Portable medical & electronics: compact, lightweight energy.
- Off-grid / solar hybrid auxiliaries: paired with Newon’s solar lighting range and storage — but for daily deep cycling prefer LFP (see guide above).
Finished Packs, Not Loose Cells
A loose 18650 is not a battery. Newon’s Custom Battery Solutions delivers MJ1 packs that are spot-welded, BMS-protected, fused, insulated, mechanically supported and capacity-tested — with as-built documentation and matched-batch reports. Browse the full ecosystem in the Solar & Energy Storage category, and read engineering write-ups on the Newon blog.
LG INR18650-MJ1 FAQ
Is the LG MJ1 a protected cell?
No. The INR18650-MJ1 is a bare, unprotected flat-top Li-ion cell with no internal protection circuit. It must be assembled into a pack with an external BMS providing overcharge, over-discharge, overcurrent, short-circuit and temperature protection before use.
How does the MJ1 compare to the Samsung 35E?
They are near-identical high-capacity peers: both ~3500 mAh at ~3 C continuous discharge. The MJ1 lists a slightly higher nominal voltage (3.7 V vs 3.7 V) and LG batch traceability; for most pack projects the two are largely interchangeable.
Can I use the MJ1 in a vape or e-cigarette?
No. The wrapper explicitly states the cell is not for e-cigarettes/vapes. It is designed for battery packs in power banks, e-bikes, power tools and portable electronics. Using it in a vape mod is unsafe and outside its intended application.
How many MJ1 cells make a 48 V e-bike pack?
Thirteen cells in series (13S) give ~47.3 V nominal, 54.6 V full charge and 32.5 V cutoff — the standard 48 V architecture. Add parallel groups (e.g. 13S10P) to raise capacity and current; each parallel string adds 3.5 Ah and 10 A of continuous headroom.
What is the maximum continuous discharge current?
10 A per cell (≈2.86 C), with a ~12.2 A pulse peak. At 10 A the cell dissipates roughly 4 W (I²R at ≤40 mΩ), so packs running near the ceiling need airflow or a thermal path — do not seal them in a ventless enclosure.
What cycle life should I expect?
The datasheet states ≥80% capacity after 401 cycles — typical for a high-capacity NMC cell that trades cycle life for energy density. For daily deep-cycled solar or UPS duty, LiFePO4 (2,000–8,000 cycles) is the better chemistry; see Newon’s LFP guide.
Disclaimer: Specifications are taken from the manufacturer’s published datasheet for the stated model. Real-world performance varies with production revision, cell age, temperature, charge/discharge rate, depth of discharge, BMS settings and pack design. Cycle-life figures are laboratory results under specified conditions, not a service-life guarantee.
Reviews (0)
Be the first to review “LG 18650 Cell – 3500mAh 3.7V | High-Capacity Li-ion” Cancel reply
Shipping & Delivery
Related products
Select options
This product has multiple variants. The options may be chosen on the product page

Reviews
There are no reviews yet.