Customised Linear and Circular Hanging Lights at Club Fitness Gym, Gulberg Islamabad — LED Gym Lighting by Newon Pakistan

Newon Pakistan designed, fabricated, and installed customised LED linear and circular hanging pendant lights at Club Fitness, a newly built premium gym in Gulberg, Islamabad. Working directly from the client’s architectural floor plan and 3D render, Newon produced bespoke aluminium-body, LED-strip, acrylic-diffuser pendant fixtures in both linear bar and circular ring formats — delivering a lighting scheme that is simultaneously high-performance for training and architecturally striking as a brand statement. Club Fitness understood what most gym operators in Pakistan are only beginning to realise: lighting is not a utility decision, it is a member experience decision.

Project Overview: Custom LED Pendant Lighting for Club Fitness, Gulberg Islamabad

Club Fitness is a premium fitness centre in Gulberg, Islamabad — one of the capital’s most commercially active and upscale addresses. From the outset, the Club Fitness team had a clear vision for the lighting: it needed to match the quality and ambition of everything else in the newly built facility. A standard commercial light grid was never going to be appropriate for a gym that had invested in premium equipment, high-end interiors, and a member experience that would justify positioning at the top of Islamabad’s fitness market.

The client came to Newon with a specific and unusually well-prepared brief. They had a dimensioned floor plan with yellow-highlighted linear light positions showing exactly where fixtures were to run, and a 3D architectural render showing what the finished lighting should look like. This is the ideal starting point for a custom fabrication project — it eliminated ambiguity about the design intent and allowed Newon to focus entirely on translating the visual specification into physical reality at the required quality level.

Newon’s scope covered the full project lifecycle: understanding the brief, producing the custom fixtures in-house, and completing the site installation. The result matches the 3D render the client brought to us — which is the only metric that matters in custom fabrication.

This project sits within a growing cluster of Gulberg commercial projects in Newon’s portfolio, alongside the Datamatics Technologies office lighting upgrade and the HBL Zarai Services corporate office at AJ Towers, Gulberg Greens — confirming Newon as the established lighting partner for premium commercial projects in Islamabad’s premier commercial address.

“LED linear lighting is redefining the concept of illumination — transcending traditional boundaries to embrace a new realm of architectural expression. Club Fitness knew this instinctively. They arrived with a 3D render and a clear vision. Our job was to make that render a physical reality — and we did.”— Newon Lighting Pakistan

Why Gym Lighting Is a Member Experience Investment, Not Just a Utility

In the global fitness industry, lighting design has evolved from an afterthought to a strategic element of the member experience. The most successful gym brands worldwide — from boutique studios in London and Dubai to large-format fitness centres in Kuala Lumpur and Singapore — treat lighting with the same intentionality as equipment selection, interior finishes, and acoustics. Pakistan’s premium gym market is rapidly reaching the same understanding.

The Science Behind Light and Physical Performance

The relationship between light and human physiology is well-established in the research literature. The Lighting Research Center at Rensselaer Polytechnic Institute — one of the world’s leading academic bodies on lighting science — has documented extensively that cooler colour temperatures (4000K–5000K) correlate with increased alertness, elevated cortisol response, and improved performance on physical and cognitive tasks. In a gym context, this means members who train under well-specified cool-white LED lighting are physiologically better prepared to push harder and recover more effectively than those training under warm or poorly illuminated conditions.

Beyond colour temperature, lumen output (brightness) directly affects exercise performance. The Illuminating Engineering Society (IES) — the authoritative body on lighting standards in North America and widely referenced internationally — recommends a minimum 300 lux at floor level for fitness areas, with 500 lux or above for premium facilities. Insufficient lux creates visual fatigue, reduces spatial awareness during movement-intensive training, and makes the space feel visually heavy and uninspiring — none of which supports the energy and motivation a good gym should generate.

Lighting as Brand Identity in Premium Pakistani Gyms

For a fitness centre operating in Gulberg Islamabad — where members have high expectations and competitive alternatives are available — the visual quality of the space is a direct reflection of the brand. Pendant lighting of the kind Newon installed at Club Fitness does something that a recessed ceiling grid cannot: it creates visual drama. The suspended linear bars and circular rings define zones, create a layered ceiling plane, and give the space an architectural identity that makes it feel designed rather than constructed. Members notice this on their first visit and remember it — it is a fundamental part of why they choose to join and why they continue to return.

This is a principle that extends beyond gyms. Newon has applied the same architectural LED pendant approach at the Farsha rooftop restaurant in I-8 Islamabad, the Movenpick Hotel Centaurus nightclub, and multiple commercial office environments — always with the same result: a space that looks and feels definitively different from one where lighting was treated as a commodity.

From 3D Render to Physical Fixture: Newon’s Custom Fabrication Process

The Club Fitness project required Newon to do something that distinguishes it from most lighting suppliers in Pakistan: fabricate custom pendant fixtures in-house to a client-specified design, rather than supply off-the-shelf catalogue products. Here is how that process unfolded from first briefing to final installation.

Step 1 — Design Brief and Drawing Review

Club Fitness provided Newon with two key documents: a dimensioned floor plan with yellow-highlighted lines indicating the positions and approximate lengths of all required linear fixtures, and a 3D architectural render showing the finished visual appearance — including the circular hanging ring fixtures that feature prominently in the design. Newon’s team reviewed the drawings in detail, confirmed fixture dimensions, hanging heights, CCT specification, and lumen output requirements, and produced a formal quotation covering both the fabrication and installation scope.

Step 2 — Production at Newon’s Fabrication Facility

Once the quotation was approved, production began at Newon’s facility. Each linear fixture was assembled from four components:

• Extruded aluminium body: Cut and shaped to the required length for each linear run, or bent and welded to the circular ring profile for the round pendants. Aluminium is the correct material for this application — it is lightweight, structurally rigid at the pendant sizes required, and acts as an effective heat sink for the LED strip, extending LED lifespan significantly compared to plastic-housed alternatives.
• LED strip light: High-density, high-CRI LED strip mounted within the aluminium channel. Strip specification — wattage per metre, CCT, and LED chip density — was selected to achieve the target lumen output across each fixture length and ring circumference.
• Acrylic diffuser: A frosted or opal acrylic panel fitted over the LED strip, diffusing the output to eliminate visible LED hotspots and produce a smooth, uniform glow across the full face of the fixture. The diffuser is the component that gives custom architectural pendants their premium appearance — without it, the fixture reads as an exposed strip rather than a designed luminaire.
• Stainless steel hanging wire kit: Each fixture was fitted with adjustable-length stainless steel pendant wire kits, allowing precise hanging height adjustment during installation to match the 3D render specifications.

Step 3 — Site Installation

Completed fixtures were transported to the Club Fitness site in Gulberg and installed according to the floor plan positions. Ceiling fixings were installed at the correct coordinates, hanging wire lengths were adjusted to achieve the specified pendant heights, and all electrical connections were completed and tested zone by zone. The circular hanging ring pendants — the most visually distinctive element of the scheme — were installed above their designated floor zones and adjusted to consistent heights across the space.

Technical Specifications: Custom Linear and Circular LED Pendant Lights — Club Fitness

Parameter	Linear Pendant Fixtures	Circular Pendant Fixtures
Fixture Type	Custom linear bar pendant	Custom circular ring pendant
Body Material	Extruded aluminium (heat sink function)	Bent and welded aluminium profile
Light Source	High-density LED strip (SMD 2835 / 5050)	High-density LED strip (SMD 2835 / 5050)
Diffuser	Frosted / opal acrylic panel	Frosted / opal acrylic panel
Suspension System	Stainless steel adjustable hanging wire kit	Stainless steel adjustable hanging wire kit
Colour Temperature (CCT)	4000K neutral white	4000K neutral white
Colour Rendering Index (CRI)	≥ 80 Ra (CRI ≥ 90 available on request)	≥ 80 Ra (CRI ≥ 90 available on request)
Input Voltage	220V AC / 12V or 24V DC (driver-dependent)	220V AC / 12V or 24V DC (driver-dependent)
Power Consumption	Calculated per linear metre of fixture length	Calculated per ring circumference
Target Floor Lux	500+ lux (gym floor — IES recommendation for premium fitness)
Flicker	Flicker-free — quality LED driver with active PFC (IEEE 1789-2015 compliant)
Lifespan	50,000+ hours (LED strip — L70)
Dimensions	Custom per floor plan specification	Custom diameter per design render
Finish	Anodised / powder-coated aluminium	Anodised / powder-coated aluminium

All fixtures were produced to the dimensions and positions specified in the Club Fitness floor plan and 3D render. Custom sizes, shapes, and specifications are available for other projects — contact Newon for a fabrication enquiry.

For Architects and Interior Designers: Specifying Custom LED Pendant Lighting for Sports and Fitness Facilities

Lighting design for fitness facilities requires balancing a technical performance brief (lux levels, flicker compliance, CCT selection) with an architectural brief (fixture form, spatial hierarchy, ceiling zone definition). The Club Fitness project demonstrates how these two objectives can be addressed through a single, well-considered custom pendant solution. Here is what the specification process looks like for similar projects.

Lux Levels and Zone Differentiation

The Chartered Institution of Building Services Engineers (CIBSE) — the UK’s authoritative body on building services engineering, whose standards are widely adopted in Pakistan’s commercial construction sector — publishes Lighting Guide LG4 for sports facilities. It recommends:

• General fitness floor: 300–500 lux at floor level
• Group exercise / studio: 300–500 lux (dimmable for class types)
• Free weights and resistance zones: 500 lux
• Reception and lobby: 200–300 lux
• Changing rooms: 200 lux

Custom pendant positioning allows each zone to be individually addressed — linear runs above workstation rows of equipment, circular rings above open floor zones — creating the spatial hierarchy that differentiates functional areas without physical partitioning.

Flicker Compliance for Moving Environments

This is a specification parameter that is frequently overlooked in Pakistani commercial projects but is critically important in gym environments. The IEEE 1789-2015 standard on LED flicker defines safe flicker thresholds to prevent stroboscopic effects on moving objects. In a gym where weights, cables, fans, and users are in continuous motion, non-compliant drivers can create disorienting visual artefacts. Specifying all gym lighting fixtures with active power factor correction (PFC) LED drivers eliminates this risk. Newon specifies PFC drivers as standard on all commercial lighting installations.

CCT Selection for Training vs Recovery Zones

Research published in the LEUKOS journal of the Illuminating Engineering Society confirms the physiological differentiation between cool and warm light CCT on human alertness and physical readiness. For training zones, 4000K–5000K is the correct specification. For recovery, stretching, yoga, and meditation zones within a multi-function fitness facility, 3000K warm white creates a physiologically distinct signal to the nervous system — supporting the shift from sympathetic (fight/flight/exercise) to parasympathetic (rest/recovery) state. Designing CCT differentiation across zones by specification — rather than by separate fitting types — is achievable using CCT-tunable track lights or dimmable pendant circuits in multi-use spaces.

Custom Fabrication vs Catalogue Selection

For architects working on premium fitness or hospitality projects in Pakistan, custom fabrication through Newon offers a significant advantage over catalogue selection: the fixture design is dictated by the architectural intent rather than by what happens to be available in a supplier’s standard range. As demonstrated at Club Fitness, Newon can produce any aluminium-body pendant form — linear at any length, circular at any diameter, rectangular, L-shaped, or bespoke — from a design drawing or 3D render. Lead time from confirmed brief to fabricated fixture is typically 7–14 days. Contact Newon’s project team for a custom fabrication consultation.

For Homeowners: Linear and Circular Hanging Lights for Residential Spaces in Pakistan

The same custom linear and circular pendant lighting that transforms a premium gym like Club Fitness in Gulberg has equally powerful applications in residential spaces. Pakistani homeowners in DHA, Bahria Town, F-sector Islamabad, and other premium housing developments are increasingly moving away from standard chandelier and pop ceiling designs toward architectural pendant lighting that reflects contemporary global interior trends.

Where Linear and Circular Pendants Work in Homes

Linear hanging lights are most impactful above dining tables, kitchen islands, and study desks — spaces where a long, directional light source aligned with the furniture below creates a strong visual and functional anchor for the zone. A single 1200mm linear pendant above a 1500mm dining table creates a defined dining moment that no chandelier or downlight grid can replicate with the same directness and modernity.

Circular ring pendants — of the type installed at Club Fitness — work beautifully in residential drawing rooms, master bedrooms, and open-plan living spaces where a geometric statement piece is desired. Unlike traditional chandeliers, circular LED ring pendants are visually light and contemporary rather than heavy and ornate — the right aesthetic for new builds and modern renovation projects in Islamabad and Rawalpindi.

Newon can fabricate custom residential pendant fixtures to any specification — size, shape, finish colour, CCT, and lumen output — or supply from Newon’s range of linear hanging and recessed bar lights and chandeliers and pendants for homeowners who prefer catalogue selection over custom fabrication.

For Commercial and Hospitality Clients: Custom LED Pendants Across Every Sector

Custom architectural LED pendant lighting is not exclusive to gyms. Newon has delivered comparable custom pendant and linear lighting solutions across hospitality, F&B, corporate office, and retail environments in Pakistan. The common thread across all of these projects is a client who had a specific visual outcome in mind and chose Newon because we could fabricate to that specification rather than constrain them to a catalogue.

Pakistan’s commercial real estate sector is maturing rapidly. The Pakistan Bureau of Statistics records continued growth in commercial construction activity in Islamabad, Lahore, and Karachi — and with it, an expanding cohort of developers, operators, and brand managers who understand that the interior environment is a commercial asset, not a cost centre. Lighting is the most immediately impactful and least reversible element of that environment. Getting it right at project stage — with fixtures that genuinely reflect the design intent — is always more cost-effective than retrofitting a second-rate installation.

Newon’s custom fabrication capability, combined with our installation expertise and 8+ years of commercial project experience, makes us the natural partner for any commercial client in Pakistan who wants their lighting to do more than illuminate. Our international reach through newon.ae in the UAE and GCC markets means we bring global commercial standards to every Pakistani project we undertake.

To discuss a custom LED pendant lighting project:

📞 +92 343 9227883  |  💬 WhatsApp  |  📧 info@newon.pk

International Lighting Standards for Gyms and Fitness Facilities — What They Mean for Pakistan

Pakistan does not yet have a dedicated national lighting standard for fitness facilities, but the country’s commercial construction sector routinely references international standards — particularly those from the IES, CIBSE, and CIE — for premium commercial project specifications. Understanding these standards helps gym owners, architects, and contractors in Pakistan make informed lighting decisions.

IES Recommendations for Fitness Facilities

The Illuminating Engineering Society (IES) publishes the Lighting Handbook, which is the definitive reference document for lighting design globally. For fitness facilities, IES recommends a maintained average of 300–500 lux at floor level for general gym areas, with task-specific zones requiring 500 lux or higher. IES also emphasises the importance of uniformity ratio — the ratio of average to minimum illuminance across a space — recommending a uniformity of at least 0.7 (meaning the darkest point is no less than 70% of the average brightness). Poor uniformity creates visual discomfort and safety concerns in movement-intensive environments.

CIE Guidelines on Colour and Sport

The International Commission on Illumination (CIE) — the global authority on colour, light, and vision science — has published technical reports confirming the importance of CRI (Colour Rendering Index) in sports and fitness environments. A CRI of ≥ 80 is specified as the minimum for any occupied working space. For spaces where accurate colour perception matters — including gym environments where skin tone, equipment colour coding, and spatial depth perception all affect user experience — CIE recommends targeting CRI ≥ 90 wherever budget allows.

WHO Guidance on Light and Human Health

The World Health Organization (WHO) has published guidelines on environmental noise, air quality, and light exposure in built environments, noting that appropriate lighting levels in occupational and leisure settings are a determinant of both physical safety and psychological wellbeing. In gym environments, adequate lighting directly reduces the risk of exercise-related accidents from tripped equipment or misjudged spatial distances — a safety argument that sits alongside the performance and aesthetic arguments for quality gym lighting.

Newon designs all commercial lighting projects with reference to these international standards. For Pakistani gym and fitness centre operators who want their facilities to meet global benchmarks — whether for certification, insurance, or simply the confidence of building to best practice — Newon can provide specification documentation aligned with IES, CIBSE, and CIE guidelines.

Related Commercial Lighting Projects by Newon Pakistan

Newon’s portfolio of commercial, hospitality, and architectural LED lighting projects demonstrates consistent capability across every sector. The following projects are most directly comparable to the Club Fitness installation:

• Linear Hanging Rectangular Lights — Corporate Office, Islamabad — Linear pendant rectangular fixture installation in a professional office space — same fixture category as the Club Fitness linear pendants, applied in a corporate context.
• Linear Bar Lighting — British American Tobacco Head Office, EOBI Building, Islamabad — Architectural linear bar lighting for one of Pakistan’s most prominent multinational corporate headquarters.
• Corporate Office Lighting — HBL Zarai Services, AJ Towers, Gulberg Greens Islamabad — Complete corporate office lighting for an HBL Group subsidiary — also in Gulberg, Islamabad.
• Office Lighting Upgrade — Datamatics Technologies, Gulberg Islamabad — Multi-format pendant and COB spotlight office upgrade — same Gulberg address corridor as Club Fitness.
• Rooftop Restaurant Lighting — Farsha Café, I-8 Islamabad — Complete lighting design for Islamabad’s popular rooftop dining venue — architectural pendant lighting in a premium hospitality context.
• Nightclub Lighting — Movenpick Hotel Centaurus, Islamabad — Premium entertainment and hospitality lighting for Islamabad’s flagship five-star hotel — specialist LED systems in a high-performance commercial environment.
• Restaurant Chain Lighting — The Last Tribe (TLT), Pakistan — Multi-site commercial LED lighting supply for one of Pakistan’s expanding restaurant chains — demonstrating Newon’s capability in commercial rollout projects.
• Commercial Facade Lighting — Union Square, D-12 Islamabad — RGB architectural facade lighting for a prominent D-12 commercial plaza — showing Newon’s full indoor-to-outdoor commercial lighting capability.

Frequently Asked Questions — Gym Lighting and Custom LED Pendants Pakistan

What type of lighting is best for a gym or fitness centre in Pakistan?

The optimal gym lighting combines high lumen output (500+ lux at floor level), cool-to-neutral CCT (4000K–5000K) to promote alertness and energy, flicker-free LED drivers to prevent stroboscopic effects on moving objects, and a fixture design that adds architectural value to the space. For premium fitness centres in Pakistan, custom pendant fixtures — as installed at Club Fitness Gulberg — deliver both the performance specification and the visual identity that distinguishes a high-end gym from a utility facility.

What are customised linear hanging lights made of?

Newon’s custom linear and circular pendant lights consist of an extruded aluminium body (structural housing and heat sink), a high-density LED strip light mounted inside the channel, a frosted or opal acrylic diffuser covering the LED strip for smooth, hotspot-free output, and a stainless steel adjustable hanging wire suspension kit. The aluminium body can be fabricated to any length and profile — linear, circular, rectangular, L-shaped, or fully bespoke — from a client’s design drawings or 3D render.

Can Newon produce custom-sized LED pendant lights to match a specific design or 3D render?

Yes — this is exactly what was done for Club Fitness. The client provided a floor plan with highlighted fixture positions and a 3D render. Newon produced the physical fixtures in its fabrication facility to those exact dimensions and installed them at site. Any architectural pendant form — any length, any diameter, any profile — can be produced from a design drawing. Contact Newon at info@newon.pk with your drawings to begin a custom fabrication enquiry.

What lux level is recommended for gym lighting?

The IES and CIBSE LG4 recommend a minimum of 300 lux at floor level for general fitness areas, with 500 lux for premium and high-activity zones including free weights, resistance equipment, and group exercise studios. Uniformity ratio (minimum to average lux) should be at least 0.7 to prevent visually uncomfortable bright-and-dark patches across the floor. Newon designs gym lighting layouts to meet these benchmarks as a minimum standard.

Why does gym lighting need to be flicker-free?

In a gym, fast-moving objects — weights, cables, ropes, and the users themselves — interact with flickering light to create a stroboscopic effect that causes disorientation and visual discomfort. The IEEE 1789-2015 standard defines safe flicker limits for LED lighting in occupied spaces. Newon specifies active PFC LED drivers on all commercial lighting installations to ensure complete flicker-free performance regardless of mains supply fluctuation — an important consideration given Pakistan’s WAPDA supply variability.

What colour temperature is best for gym lighting?

4000K–5000K neutral to cool white is the scientifically recommended range for training zones. Research from the Lighting Research Center at Rensselaer Polytechnic Institute confirms that this CCT range promotes alertness, elevates physical readiness, and supports sustained high-intensity exercise. Warm white (3000K) is appropriate for dedicated recovery, yoga, and relaxation zones where the desired physiological state is calm rather than energised. Club Fitness was specified at 4000K across the main training floor.

How much does custom gym lighting cost in Pakistan?

Custom gym pendant lighting costs depend on floor area, fixture count, individual fixture dimensions, LED specification, and full installation scope. Newon’s in-house fabrication often makes custom solutions cost-competitive with comparable imported catalogue fixtures, without the lead-time uncertainty of international shipping. Contact Newon at WhatsApp +92 343 9227883 or info@newon.pk for a project quotation.

The detailed images, diagrams, plan and final project delivered are listed below.

Yellow highlighted lines are the linear lights proposed in the design.

Thats how it looks like in 3d render.

After understanding the drawing, we have started production at the facility. Above picture is from the production facility.

About Newon — Pakistan’s Custom Architectural Lighting Specialists

Newon is Pakistan’s specialist in architectural LED lighting — offering design, custom fabrication, supply, and professional installation from a single team based in Islamabad. Our 8+ years of commercial, hospitality, government, and residential projects — 35+ documented — include some of Pakistan’s most demanding clients: Movenpick Hotel Centaurus, HBL Zarai Services, British American Tobacco, the World Bank Building, KP Government’s KITE project, Rashakai Special Economic Zone, and now Club Fitness Gulberg.

Our custom fabrication capability sets us apart from suppliers who are limited to catalogue selection. If you have a design, a 3D render, or an architectural concept and you need someone to turn it into a physical lighting reality — Newon is the team to call. We also extend our commercial lighting expertise to the UAE and GCC through newon.ae, serving international clients to the same standard we deliver in Pakistan.

Start Your Custom Lighting Project

📧 info@newon.pk
📞 +92 343 9227883
💬 WhatsApp: +92 343 9227883
📍 Office No 2, First Floor, Haroon Plaza, Islamabad, Pakistan

Explore relevant products:
Linear Hanging & Bar Lights  |  Chandeliers & Pendants  |  Customised Lights  |  LED Strip Lights  |  LED Aluminium Profile  |  LED Drivers & Power Supplies

Installation services:
Indoor Lighting Installation  |  Linear Profile Installation  |  Outdoor Lighting Installation