Led cob rgb strip light

COB RGB LED Strip Light Pakistan — 576 LEDs/m | 14W/m | 24V DC | PKR 850/m

Problem: Standard SMD RGB strips show visible bright dots and dark gaps between LEDs — unprofessional in cove lighting, profile lighting, and any application where the light line is viewed at close range.
Solution: This COB RGB strip packs 576 Chip-on-Board LEDs per metre, producing a completely seamless, continuous colour line from any viewing distance or angle.
PKR 850/m. Warranty: 12 months.

COB RGB 576 LEDs/m vs Standard RGB Strip — Which Should You Choose?

Specifications

Which Application Is This Strip Best For?

Where It’s Used

• Ceiling cove and cornice RGB lighting — seamless glow along ceiling edges in residential and commercial interiors across DHA Islamabad, Defence Karachi, and Gulberg Lahore
• Slatted wall panel backlighting — RGB colour behind timber, metal, or gypsum panels; see Newon’s slatted wall panel installation
• Staircase step edge RGB — colour-changing step nose lighting in residential staircases and hospitality interiors
• Nightclub and entertainment ambiance — as installed at Movenpick Hotel Centaurus nightclub, Islamabad
• Retail display shelving — under-shelf colour accent for fashion, electronics, and cosmetics retail in commercial plazas
• Under-cabinet kitchen lighting — RGB colour accent beneath kitchen upper cabinets in premium residential kitchens

Frequently Asked Questions

Why does 576 COB LEDs/m produce a better result than standard RGB strips?
Standard SMD RGB strips have 60–120 LEDs per metre with visible gaps between chips. At 576 COB LEDs per metre the chip pitch is approximately 1.7mm — producing a light surface that is indistinguishable from a continuous illuminated line even at close range. In cove and profile lighting this difference is immediately visible to anyone in the room.

Why use 24V DC instead of 12V for this COB RGB strip?
At 14W/m, a 24V strip draws half the current of an equivalent 12V strip, reducing voltage drop significantly. At 24V a single power supply covers up to 10m before colour shift becomes visible at the far end, versus approximately 5m at 12V — essential for the long ceiling cove runs common in DHA and Bahria Town residential construction.

What RGB controller is compatible with this 24V COB strip?
Any 24V DC 3-channel RGB controller works. Newon’s RF wireless touch controller (3-way) is directly compatible for residential use. For DMX control or larger installations, Newon’s LED 510 Main Controller or DMX Sub-Controller 408 provides professional-grade RGB management.

How do I calculate the correct power supply wattage?
Multiply total strip length in metres by 14W/m, then add 20% safety headroom. Example: 5m = 70W load — use a minimum 100W 24V driver. For runs over 5m, inject power at both ends to maintain colour consistency. Browse Newon’s 24V LED power supplies for matched wattage options.

Can this strip be used outdoors?
IP62 provides dust protection and resistance to light splash — suitable for covered outdoor areas. For exposed outdoor or wet-area installation in Pakistan’s monsoon conditions, use Newon’s IP67 COB waterproof strip which withstands direct rainfall and irrigation exposure.

Frequently Bought Together

• RF Wireless Touch Controller (3-way, 24V) — Direct RGB control via remote, no line-of-sight required (PKR 5,000)
• LED Aluminium Profiles — Housing for cove, shelf, and recessed installations

Seen in Newon projects:
Movenpick Hotel Centaurus Nightclub  |
Slatted Wall Panel Installation  |
Jacuzzi Room Multi-Layer Lighting

Order or Ask a Question

💬 WhatsApp: +92 343 9227883

📧 info@newon.pk  |
📞 +92 343 9227883
📍 Office No 2, First Floor, Haroon Plaza, Islamabad

All LED Strip Lights  |
COB Waterproof Strip (IP67)  |
RGB Controller  |
24V Power Supplies  |
UAE: newon.ae